| Tel: (65) 67738530 Fax: (65) 63698536 |
 SVSII
Deluxe
|
|
The KWIK-WAY valve refacer is used by high performance engine builders around the world. These machines can be equipped with a high performance chuck accurate to within .0002". These extremely accurate machines are availabe upon request. |
|
SVS Series II Deluxe Specifications |
|
| Min. chuck capacity: Standard | .157" (4.0mm) |
| Max chuck capacity: Standard | .5625" (14.3mm) |
| Valve head diameter capacity | .750-4" (19.05-101.6mm) |
| Min. stem length | 3.375 (85.73mm) |
| Valve wheel diameter | 7" (178mm) |
| Surface wheel diameter | 3" (76mm) |
| Spindle drive motor | 1/2 hp |
| Chuck drive motor | Gear Drive 1/10 hp |
| Coolant capacity | 1 gallon (3.8l) |
| Valve wheel rpm/sfpm | 3450rpm/6322sfpm |
| Stem wheel rpm/sfpm | 3450rpm/2708sfpm |
| Chuck speed | Variable speed 100-300 rpm |
| Min. air requirement | 65 psi |
| Overall length | 37" (940mm) |
| Overall width | 22" (599mm) |
| Overall height | 16" (406mm) |
| Height (on stand) | 51" (1295mm) |
| Shipping weight | 292 lbs (132.7kg) |
|
Valve Guide and Seat Center (043)
|
| The system is the preferred
method for rebuilding cylinder heads. Production and high performance
shops have found it to have all the features and benefits necessary for
both cast iron and aluminum heads.
Aluminum heads are especially fragile and prone to server warpage. Guides repaired with Classic Bronze Liners do not disturb the head, or alter critical dimensions. Good alignment to the valve seats is assured. |
|
043 Valve Guide and Seat Center Specifications |
|
| Cutting head | Air floating and clamping tapered roller bearing spindle |
| Drive system | Single poly "V" belt |
| Drive motor | 1 hp DC motor |
| Spindle rotation speed | Variable and reversible from 0-350rpm |
| Spindle travel | 8" (203mm) |
| Spindle taper | ISO 30 |
| Head tilt | 12o in both directions |
| Max. cylinder head length in 3600 cradle | 43" (1092mm) (unlimited without cradle) |
| Working height (max. distance from spindle nose to bottom of cradle) | 12" (305mm) |
| Working depth (Throat- Max. distance from spindle centerline to vertical base) | 12 1/2" (318mm) |
| Electrical required | 115/60/1 -15amp
220/50/10- 8 amp |
| Air required | 60-100 psi (4.1-6.8 bars) |
| Space required | Length 60" (1524mm) |
| Depth 30" (762mm) | |
| Height 82" (2083mm) | |
| Shipping weight | 2200 lbs (1000kg) |
|
Power Stroke Cylinder Home (092)
|
|
Features |
|
| Auto Retract | Permits
removal of the hone head while rotating, thus allowing a uniform
crosshatch pattern throughout the cylinder
|
| Dual Air Cylinders | Provide more power for a smooth stroking operation in showing a precise
crosshatch pattern
|
| Variable Stroking Rate | Allows the machine operator to dial in the exact crosshatch angle
required. No more guesswork
|
| Dwell Mode | Provides
positioning of the hone head at any location from extreme bottom to top
of the cylinder bore
|
| Load Meter | Indicates variations in cylinder bore geometry. Friction feed hone head- allows for rapid expansion and retraction of stones for fast set-ups. |
|
Rollover fixture |
Switches from bank to bank on V-block in mere seconds, increasing productivity |
|
Splash Curtain |
An oil resistant curtain that retracts completely out of the way for easy loading and uploading of the work piece.
|
| The KWIK-WAY power stroke cylinder hone will quickly and accurately hone all general automotive V-blocks and in-lines to 42" in length. It provides fast, precision honing and operator convenience and comfort. | |
