|
General Description |
|
 |
Corghi's Flagship product, ARTIGLIO BASIC is the most automated unit in the market |
|
Pneumatic tiliting column combined with the 665mm height of the turn table gives max. ease and speed of use during mounting and demounting. |
|
|
Turntable automatically tilts downwards for easier loading of the wheel onto the turntable and is equipped with a two-speed motor |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs. |
|
The bead breaking unit is euipped with a two-position telescopic wheel pad for breaking the bead on all wheels up to 14" wide and the bead breaker arm is of the "short stroke" type for quicker bead breaking. |
|
Main Characteristics |
|
|
Automatic tyre changer with pneumatic tilting column and 20" turntable |
|
Turntable height 665 mm |
|
Pneumatic tilting turntable for loading wheels up to 70 kg |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Pneumatic tilting arm support column featuring high torsional rigidity in all operating positions |
|
Telescopic horizontal arm for rapid head positioning to the rim |
|
Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position |
|
Head with interchangeable plastic parts for rim protection |
|
Bead breaking unit with stainless steel pneumatic cylinder |
|
Telescopic two-position bead breaker pad (CORGHI patent) for breaking the bead on wheels up to 14" wide |
|
"Short stroke" bead breaker arm |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifter lever |
|
Complete with lubrication filter and pressure regulator |
|
Technical data |
|
General Description |
|
|
|
Designed to resolve the problems posed by wide light alloy rims with low profile tyres, this unit features exceptional ease of use, precision, functionality and versatility and is ideal for sports wheel applications. |
|
|
Operation is automatic with pneumatic swinging arm and 20" turntable, and the unit is ideal for mounting/demounting wheels for cars and vans. |
|
|
The head is integrated in a single-casting unit with its fulcrum at the centre of the rim to protect light rims against damage and interchangeable plastic parts for the inner surfaces in contact with the rim during tyre mounting/demounting. |
|
|
To protect the rim, plastic guards are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs. |
|
|
The pantograph type bead breaker gives the shoe the optimal angle of incidence for working with the widest range of tyres, including low pressure, high volume "balloon" models and the bead breaker arm is of the "short stroke" type for quicker bead breaking. |
| Technical data Turntable inside clamping capacity 13" - 23" outside clamping capacity 10" - 20" max. tyre diameter 1150 mm max. tyre width 360 mm / 14" n° clamps 4 n° cylinders 2 rotational torque 1000 Nm rotational speed 6 - 18 rpm Bead Breaker max. opening 384 mm short stroke standard shoe pressure 17000 N Tool working range 12" - 22" column fixed column locking pneumatic Power Supply electric single-phase 230 V – 0.55 kW Operating Pressure 10 bar Weight 345 kg |
|
Main Characteristics |
|
|
Automatic tyre changer with pneumatic swinging arm and 20" turntable |
|
Sliding pad with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Fixed arm support column featuring high torsional rigidity in all operating positions |
|
Pneumatic swinging horizontal arm for rapid head positioning to the rim |
|
Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position |
|
The head is integrated in a single-casting unit with its fulcrum at the centre of the rim to protect rims against damage |
|
Bead breaking unit with stainless steel pneumatic cylinder |
|
Pantograph type bead breaker for a wider range of tyres |
|
"Short stroke" bead breaker arm |
|
Fixed bead breaker pad |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting lever |
|
Complete with lubrication filter and pressure regulator |
|
Pedal inflation |
|
T.I. bead seating/inflation system as standard supply |
|
Two speed motor as standard supply |
|
General Description |
|
|
|
Reliability and performance confirmed by thousands of professionals around the world, adaptability to all types of wheel and requirement, even the most demanding – these are the reasons for the extraordinary popularity of the A2019, the market standard and the most sold model in the entire Corghi range. |
|
|
Operation is automatic, with pneumatic column tilting and 20" turntable, and it is ideal for mounting/demounting car, van and motorcycle tyres. |
|
|
The pneumatic tilting column combined with the 665 mm height of the turntable give maximum ease and speed of use during mounting/demounting. |
|
|
The standard head is designed to protect even the lightest rims, using interchangeable plastic components for the inner surfaces contacting the rim during tyre mounting/demounting. |
|
|
Furthermore, to protect the rim, plastic guards are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs. |
|
|
The bead breaking unit is equipped with a two-position telescopic wheel pad (CORGHI patent) for breaking the bead on all wheels up to 14" wide. |
|
Main Characteristics |
|
|
Automatic tyre changer with pneumatic tilting column and 20" turntable |
|
Turntable height 665 mm |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Pneumatic tilting arm support column featuring high torsional rigidity in all operating positions |
|
Telescopic horizontal arm for rapid head positioning to the rim |
|
Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position |
|
Column with interchangeable plastic parts for rim protection |
|
Bead breaker with stainless steel pneumatic cylinder |
|
Telescopic two-position bead breaker pad (CORGHI patent) for breaking the bead on wheels up to 14" wide |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting leve |
|
Complete with lubrication filter and pressure regulator |
|
Gun inflation (with pedal only on T.I. version) |
|
Available with traditional inflation or T.I. bead seating/inflation system |
|
Available in electric or pneumatic versions or the DV model with two-speed motor |
| Technical data Turntable inside clamping capacity 13" - 23" outside clamping capacity 10" - 20" max. tyre diameter 960 mm max. tyre width 360 mm / 14" n° clamps 4 n° cylinders 2 rotational torque 1200 Nm rotational torque (DV model) 1000 Nm rotational speed 8 rpm rotational speed (DV model) 6 - 18 rpm height 665 mm Bead Breaker max. opening 380 mm shoe pressure 15500 N pad telescopic Tool working range 10" - 22" column pneumatic tilting head locking pneumatic Power Supply electric 3-phase 230/400 V – 0.75 kW electric 1-phase 110/230 V – 0.75 kW electric 1-phase (DV model) 230 V – 0.55 kW pneumatic on request Operating Pressure 10 bar Weight standard model 234 kg T.I. version 244 kg |
|
General Description |
|
|
|
Reliability, unbeatable value for money and a wide range of models are the reasons for the popularity of the A2010 which has been one of our most requested products since its launch. |
|
|
Operation is automatic, with pneumatic tilting column and 20" turntable, and it is ideal for mounting/demounting car, van and motorcycle tyres.. |
|
|
The pneumatic tilting column combined with the 665 mm height of the turntable give maximum ease and speed of use during mounting/demounting. The standard head is designed to protect even the lightest rims, using interchangeable plastic components for the inner surfaces contacting the rim during tyre mounting/demounting. |
|
|
To protect the rim, plastic guards are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs. |
|
Main Characteristics |
|
|
Automatic tyre changer with pneumatic tilting column and 20" turntable |
|
Turntable height 665 mm |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Pneumatic tilting arm support column featuring high torsional rigidity in all operating positions |
|
Telescopic horizontal arm for rapid head positioning to the rim |
|
Simultaneous pneumatic locking of the horizontal and vertical arms with automatic positioning of the head in the optimal work position |
|
Head with interchangeable plastic parts for rim protection |
|
Bead breaking unit with stainless steel pneumatic cylinder |
|
Fixed bead breaker pad |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting lever |
|
Complete with lubrication filter and pressure regulator |
|
Gun inflation (with pedal only on T.I. version) |
|
Available with traditional inflation or T.I. bead seating/inflation system |
|
Available in electric or pneumatic versions or the DV model with two-speed motor |
| Technical data Turntable inside clamping capacity 13" - 23" outside clamping capacity 10" - 20" max. tyre diameter 960 mm max. tyre width 305 mm / 12" n° clamps 4 n° cylinders 2 rotational torque 1200 Nm rotational torque (DV model) 1000 Nm rotational speed 8 rpm rotational speed (DV model) 6 - 18 rpm height 665 mm Bead Breaker max. opening 320 mm shoe pressure 15500 N Tool working range 10" - 22" column pneumatic tilting head locking pneumatic Power Supply electric 3-phase 230/400 V – 0.75 kW electric 1-phase 110/230 V – 0.75 kW electric 1-phase (DV model) 230 V – 0.55 kW pneumatic on request Operating Pressure 10 bar Weight standard model 214 kg T.I. version 224 kg |
|
General Description |
|
|
|
The high versatility of this tyre changer combined with its unbeatable reliability, tested over years of service, make this unit an excellent investment combining high performance with low cost. |
|
|
Operation is semi-automatic, with tilting column and 20" turntable, and it is ideal for mounting/demounting car, van and motorcycle tyres. |
|
|
The pneumatic tilting column combined with the 665 mm height of the turntable give maximum ease and speed of use during mounting/demounting. |
|
|
The standard head is designed to protect even the lightest rims, using interchangeable plastic components for the inner surfaces contacting the rim during tyre mounting/demounting. |
|
|
Furthermore, to protect the rim, plastic guards are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs |
|
Main Characteristics |
|
|
Semi-automatic tyre changer with tilting column and 20" turntable |
|
Turntable height 665 mm |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Manual tilting arm support column featuring high torsional rigidity in all operating positions |
|
Telescopic horizontal arm for rapid head positioning to the rim |
|
Simultaneous pneumatic locking of the horizontal and vertical head holder arm |
|
Head with interchangeable plastic parts for rim protection |
|
Bead breaking unit with stainless steel pneumatic cylinder |
|
Fixed bead breaker pad |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting lever |
|
Complete with lubrication filter and pressure regulator |
|
Gun inflation |
|
Available in electric or pneumatic versions |
| Technical data Turntable inside clamping capacity 13" - 23" outside clamping capacity 10" - 20" max. tyre diameter 960 mm max. tyre width 280 mm / 11" n° clamps 4 n° cylinders 2 rotational torque 1000 Nm rotational speed 6.5 rpm height 665 mm Bead Breaker max. opening 320 mm shoe pressure 15500 N Tool working range 10" - 22" column manual tilting head locking manual Power electric 3-phase 230/400 V – 0.55 kW electric 1-phase 110/230 V – 0.75 kW pneumatic on application Operating Pressure 10 bar Weight 214 kg |
|
General Description |
|
|
|
Ease of use, reliability and performance are the features that make the A2000 ideal for anyone who requires a versatile and competitively priced tool. |
|
|
Operation is semi-automatic, with swinging arm and 20" turntable, and it is ideal for mounting/demounting car, van and motorcycle tyres. |
|
|
The standard column is designed to protect even the lightest rims, using interchangeable plastic components for the inner surfaces contacting the rim during tyre mounting/demounting. |
|
|
To protect the rim, plastic protectors are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamping zones bear witness to the attention paid to ergonomics, safety and operating costs. |
|
Main Characteristics |
|
|
Semi-automatic tyre changer with swinging arm and 20" turntable |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Fixed arm support column featuring high torsional rigidity in all operating positions |
|
Swinging horizontal arm for rapid column positioning to the rim |
|
Manual locking of the horizontal and vertical head holder arm |
|
Head with interchangeable plastic parts for rim protection |
|
Bead breaking with stainless steel pneumatic cylinder |
|
Fixed bead breaker pad |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting lever |
|
Complete with lubrication filter and pressure regulator |
|
Gun inflation (with pedal only on T.I. version) |
|
Available with traditional inflation or T.I. bead seating/inflation system |
|
Available in electric or pneumatic versions |
| Technical data Turntable inside clamping capacity 13" - 23" outside clamping capacity 10" - 20" max. tyre diameter 960 mm max. tyre width 305 mm / 11" n° clamps 4 n° cylinders 2 rotational torque 1000 Nm rotational speed 6.5 rpm Bead Breaker max. opening 320 mm shoe pressure 15500 N Tool working range 10" - 22" column fixed head locking manual Power electric 3-phase 230/400 V – 0.55 kW electric 1-phase 110/230 V – 0.75 kW pneumatic on request Operating Pressure 10 bar Weight standard model 192 kg T.I. version 202 kg |
|
General Description |
|
|
|
Reliability and excellent value for money have determined the success of this model over the years which is still one of the most popular models in the Corghi catalogue. |
|
|
Operation is semi-automatic, with swinging arm and 18" turntable, and it is ideal for mounting/demounting car, van and motorcycle tyres. |
|
|
The standard head is designed to protect even the lightest rims, using interchangeable plastic components for the inner surfaces contacting the rim during tyre mounting/demounting. |
|
|
Furthermore, to protect the rim, plastic protectors are standard supply for all parts which could damage the rim during tyre changing, such as the turntable clamps, the bead breaker shoe and bead lifting lever. |
|
|
Components such as higher profile clamps and interchangeable clamp protectors bear witness to the attention paid to ergonomics, safety and operating costs. |
|
Main Characteristics |
|
|
Semi-automatic tyre changer with swinging arm and 18" turntable |
|
Sliding pads with interchangeable clamping zones |
|
Higher profile clamps for better interior/exterior wheel clamping |
|
Clamps completely protected inside and out with plastic protectors to avoid damaging light rims |
|
Turntable with double pneumatic cylinder for secure clamping of all rim types |
|
Fixed arm support column featuring high torsional rigidity in all operating positions |
|
Swinging horizontal arm for rapid head positioning to the rim |
|
Manual locking of the horizontal and vertical head holder arms |
|
Head with interchangeable plastic parts for rim protection |
|
Bead breaking unit with stainless steel pneumatic cylinder |
|
Fixed bead breaker pad |
|
Standard supply plastic protectors for the bead breaker shoe and bead lifting lever |
|
Complete with lubrication filter and pressure regulator |
|
Gun inflation (with pedal only on T.I. version) |
|
Available with traditional inflation or T.I. bead seating/inflation system |
|
Available in electric or pneumatic versions |
| Technical data Turntable inside clamping capacity 13" - 21" outside clamping capacity 10" - 18" max. tyre diameter 960 mm max. tyre width 305 mm / 12" n° clamps 4 n° cylinders 2 rotational torque 1000 Nm rotational speed 6.5 rpm Bead Breaker max. opening 320 mm shoe pressure 15500 N Tool working range 10" - 21" column fixed head locking manual Power Supply electric 3-phase 230/400 V – 0.55 kW electric 1-phase 110/230 V – 0.75 kW pneumatic on request Operating Pressure 10 bar Weight standard model 180 kg T.I. version 290 kg |
